First Flight


After hours of research and internet browsing you finally decided to take the plunge and purchase your first DJI Phantom or Vision quadcopter. You wait anxiously as you check and recheck the tracking info for your package. The 2 Day Air shipping from UPS can't come soon enough!

In the meantime, you navigate to Drone Etc.'s video tutorial page and watch the instructional videos. In the middle of your third viewing of "Unboxing and Assembly" you hear a knock at the door. It's here! Like a kid on Christmas morning you open the white DJI box and uncover your new best friend. Inside the box you see the basic form of the quad that you have become accustomed to from all of the YouTube videos you've watched. The four motors sit attached to the ends of the arms from the main body waiting for their long white props. Before starting to attach the propellers and the landing gear, you plug in the battery charger and start charging the included battery. 

After 5 min. your drone is fully assembled and ready for it's FIRST FLIGHT! At this point you may start to feel that tingle of nervousness. Did you attach the propellers in the right direction? Are you going to be able to calibrate the compass as instructed? Will you remember the controls and their respective functions on the radio transmitter? These questions and more are swirling through your mind as you queue up the "Preflight Checklist" video again.

The moment of truth has arrived. It's time to power on your radio and drone. You've check and double checked the preflight checklist and you're good to go. You power on the quad and the motors come to life with a low hum and a slow spin of their props. With slow upward pressure you ease the right throttle stick upwards, increasing power to the four spinning props. The whine of the motors increases as the drone starts to smoothly lift off the ground. You're airborne! Even though nervous and a bit unsure, you immediately note how steady and responsive the quad is as it hovers in front of you, waiting for your command.

"Are adults really allowed to have this much fun anymore? This can't be legal!", you think to yourself. And with that, you throttle your quad high into the air and begin to realize the possibilities that await...


Flying your Phantom or Vision for the first (or second, or third) time can be intimidating. Here are a few tips to help you have a fun and safe relationship with your drone:

1- Become familiar with both the small instruction guide that comes with your Phantom or Vision, as well as the instructional videos. This ISN'T one of those toys that you can 'figure out as you go". There are very important steps to be followed when calibrating your drone before it's first flight, as well as the step-wise procedure before powering the drone up before each flight.

2- Remember to follow the correct sequence. Always turn on your radio transmitter FIRST, before connecting your battery and powering on the quad.

3- Be patient! Once powering on the Phantom or Vision don't move it around! Let it acquire satellites and set it's "home position". Wait for the corresponding lights (depending on your surroundings this may take anywhere from 30 sec. to 3 min.) to indicate that "home" has been found and locked.

4- For the first few flights keep the quad close and pay close attention to the exact amount of time that it has been powered on. As soon as you see those flashing red lights, bring it down, note the time, and use that as a guide for future flights. You may even consider attaching a simple digital timer to your radio.

By following these simple procedures before each and every flight you will ensure that you won't be one of those guys who posts a video or on a forum about how their drone just "flew away" or came crashing out of the sky. As in most aviation accidents, pilot error is the number one cause.

Be aware of your surrounding, be patient and calm before and during your flights. Be safe. Have fun!!

Previous Post Next Post

  • Jonathan B
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields