Eachine Wizard X220S Racer Drone - Editors' Choice

$368.98 $2,199.91

Product Description
  
Dear customers,
Attention please.
1. The first 500 items of Eachine Wizard X220S come with iRangeX iRX-i6X remote control and iR-A8S receiver, after the first 500 items it will come with Flysky FS-i6X remote control and FS-A8S receiver.
Both of the iRX-i6X and FS-i6X are compatible with iR-A8S and FS-A8S.
2. The flexible glue anti-vibration motor pad may cause the motor to slip, please check and tighten the screws before flying.
 
Best regards,


Description:
 
Item Specification
Eachine Wizard X220S  
Wheelbase: 220mm
Frame arm: 4mm carbon fiber
Weigh: 356g (without battery and camera mount)
Take off weigh: 561g
Package weigh: 1728g
3K carbon fiber frame kit, 4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Runcam 3 for for gopro session.
Anti-vibration sponges to protect the racer frome crashing.
Eachine MN2206 2300KV motor

KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g
 
Eachine 30A BLHELI_S 4 in 1 ESC
Con. current: 30A
peak- current (10S): 35A
Input voltage: 2-5S
BEC: 5V output
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM
Eachine 1179 800TVL CCD camera
Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP)
Format: PAL
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
AWB: ON/OFF
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20 -- 60
Humidity: 0%~98%
Strong backlighting effect
5.8G 72CH 25MW 200mw 600MW
switchable transmitter

Video Format : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85
Connector: RP-SMA Female
Antenna connector: RP-SMA Male

Omnibus F4 V3 flight controller  
Size: 36x36mm
Mount holes: 30.5x30.5mm
STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.
SBUS/PPM input (Pinheaders)
6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
With barometer
SPI Sensor MPU6000
Included 128Mbit Flash, please always use BEC for the fc-.
Supported by BETAFLIGHT and dRonin
 
iRangeX iRX-i6X 2.4GHz 10CH remote control

Channel: 6-10 (Default 6)
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.408-2.475GHz
RF Power: < 20dBm
RF Channel: 135
band-width: 500KHz
2.4GHz System: AFHDS 2A / AFDHS
Modulation Type: GFSK
Stick Resolution 4096
Low Voltage Warning: < 4.2V
DSC port: PS/2 Port PPM
Chargeable: No
Antenna Length: 26mm (Dual Antenna)
Weight: 392g
Power: 6V DC 1.5AA*4
Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
Size: 174x89x190mm
On-line Update: Yes
Color: Black
Certificate: CE0678, fc-C ID: N4ZFLYSKYI6X
 
iRangeX iR-A8S receiver

Channels: PPM 8CH
Model type: Multi-rotor
Frequency range: 2.408-2.475GHz
band- width: 500KHz
band- number: 135
RX Sensitivity: -92 dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
DSC port: PPM
Transfer method: FHSS
Data output: 1.5mm*3 Pin PPM
Antenna length: 26mm (Not including brass contacts)
Input power supply: 4.0-8.4V
Display method: LED
No ground interference ( Transmitting and receiving 1 m from the ground): >300m
Working current: 40mA
Each channel data: depend on the transmitter
Channel delay: <15mS
Size: 20*14*5.3mm
Weight: 1.2g
Certificate: CE0678, fc-CID: N45ZA8S00
 
1500mAH 4S 14.8V 75C battery

Capacity(mAh) : 1500
Cells (s): 4
Weight (g): 177
Length(mm): 80
Width(mm): 30
Height(mm): 33
Connector: XT60
Eachine 5051 3-blade propeller
Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm


(Package doesn't include Runcam 3, the Runcam 3 on the pictures for reference only.)

Package included:(doesn't include Runcam 3)
1 x Eachine Wizard X220S frame kit
1 x iRangeX iRX-i6X remote control
1 x iRangeX iR-A8S receiver
2 x 2206 2300KV motor CW
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S 4 in 1 ESC
1 x Omnibus F4 V3 flight controller
1 x 800TVL camera
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 1500mAH 4S 14.8V 75C battery
1 x 30° Camera Mount(For Runcam3/for for gopro session)
1 x B3 Pro charger
1 x Pagoda antenna
2 x Battery strap
2 x Wrench


 











 


 

Our shipping is painless and simple.  All orders require 1 - 2 days processing time before being shipped (*FREE Shipping applies to select products only and is only valid within the contiguous 48 United States).  


Orders placed on Friday will be shipped first thing on Monday.


Orders that ship to an address other than your billing address will be subject to further verification and may take longer to ship.  


We will supply you with appropriate package tracking information so you can track the progress of your package once it has shipped.  


Weekend purchases will ship on or before the following Tuesday.


Orders are NOT shipped or delivered on Saturday or Sunday.


Free Shipping! It doesn't get any better.  Nobody works as hard as we do to please our customers! 


International Shipping Policy - We ship worldwide! We work with various companies to ensure that you get the best rate possible for your international shipping needs. All duties and taxes are the responsibility of the customer. Email us to get specific rate quotes.


Return Policy

ONCE A PRODUCT IS OPENED, THE SALE IS FINAL.  

For any unopened products, you will have 10 days to return the product with a 20% restocking fee.

ALL RETURNS REQUIRE AN RMA AUTHORIZATION NUMBER - CONTACT US BEFORE SHIPPING ANY PRODUCT BACK.

Warranty


The majority of our products (including DJI products) are covered under manufacturer's warranty. DronesEtc.com does not provide any warranties whatsoever and defers to the manufacturer for any complaints/warranties/guarantees as Drones Etc. does not make, manufacture, or fabricate any of the products found herein.


And remember: These parts can be complex systems, failure of one component can result in a crash or damage. The warranty does not cover, and Tucker Logan Enterprises, LLC. (parent entity of DronesEtc.com) is not responsible in any way, for damage to other equipment due to a failure of a component. DronesEtc.com is not responsible in any way for the use, misuse, or any injury or damage to personal property from use of any equipment purchased at DronesEtc.com.


Contact Us
support@dronesetc.com
If a Warranty issue does arise and the item must be returned to the manufacturer for repair or replacement the customer must do the following:
.
Contact DJI (or appropriate manufacturer) and obtain an RMA number.  The customer must then ship their purchase to DJI (or appropriate manufacturer).  DJI (or appropriate manufacturer) will then inspect and then replace the purchase at their discretion.
Please contact them at their published support contact and they will ensure you are taken care of.

If you contact DJI for support, please have available the following information:

  • Product name / number
  • Serial number
  • Date of purchase
  • Dealer name
  • Description of fault
  • Photo or Video of fault, if applicable

We're here to help! If you have any questions regarding our products, an order you placed, or anything else drone related please send us an email via the contact form on the right of this page. 

The fastest way to get a hold of us is to email us at dronesetcshop@gmail.com

Drones Etc.

We're here to help! If you have any questions regarding our products, an order you placed, or anything else drone related please send us an email via the contact form on the right of this page. 

The fastest way to get a hold of us is to email us at dronesetcshop@gmail.com

Drones Etc.