HEADPLAY HD HEADSET FPV GOGGLES WITH 1300 MAH HV LIPO BATTERY

$379.95 $499.95

Product Description

**This Item is on Backorder.  ETA is unknown**

Headplay HD, the best and most affordable FPV Goggles ever-made!

The new HeadPlay HD FPV Headset Goggles are packed full of features that every FPV enthusiast will enjoy and be left with asking for more. The HeadPlay HD Headset was designed from the ground-up with the FPV pilot in mind, with quality, performance and comfort at the forefront, over 3 years of development leaves you with the ultimate immersion experience possible. The HeadPlay HD gently rests on the forehead/cheeks spreading the weight out evenly amongst custom-designed variable density face pads, leaving many other video goggles on the markets to shame as those goggles rest mainly on the bridge of the nose and can be uncomfortable.

Three heavy-duty elastic straps securely hold the HeadPlay HD in place while at the same time blocking sunlight coming in from the outside. The end result of the HeadPlay is a cinematic experience that is sure to impress and indulge you with the best FPV experience ever. This headset is also a great choice for FPV pilots that struggle to find a traditional FPV goggle that meets their Interpupillary distance (IPD). Instead of each eye having to look through separate optics, the new HeadPlay HD presents the pilot with a huge 7inch HD screen and a extremely wide 72 degree Field-of-view (FOV). We've tested the HeadPlay HD with eye glasses and were able to make it work, even though the HeadPlay HD does not officially support wearing eye glasses we were able to make it work, depending on your eye-glasses design.

The beauty of this headset sits in the high resolution 7inch LCD HD display. The screen is bright and clear and will only go to blue screen only on 100% total signal loss. If signal lost is 100% and the screen does go to blue-screen, the switch back when signal strength increases is in the sub 1 second when any usable signal is gained. There is an integrated 32ch 5.8GHz receiver built into the headset combined with easily accessible channel and menu control panel. The smart menu is a breeze to use, even while flying it is easily navigate. With 32 channels to choose from on the built-in video receiver you can fly with your friends who are also on 5.8GHz.Easily connect to HD video sources like the DJI Inspire, DJI Phantom 3, DJI LightBridge, Paralinx, Teradek or even a TV to the headset via the HDMI input for a Imax style experience. You can also connect to any other A/V source via the A/V input. Therefore, you can still connect to an alternative video receivers system and/or ground station on the 900MHz/1.3GHz/2.4GHz etc. bands.

Highlights

  • 7" 1280x800px HD gloss screen display, 72 degrees Field-of-view!
    • The biggest display we could fit, for the most immersion and clarity.
    • A 7" HD gloss screen fills your vision and immerses you in FPV. A black felt-type Anti-reflection coating applied to all inner walls gives you the feeling of sitting front row in your own personal cinema, no more “inside-the-goggle” glare compared to others. The view has been compared to an IMAX theatre.
  • Super-sensitive Integrated 5.8GHz VRX receiver.
    • 32 channel receiver designed by RangeVideo. Super sensitive and works with Boscam/ImmersionRC/Fatshark. All channels. Channel switch by push-button and LED segment display on top of goggles.
  • HDMI input
    • Connect the Headplay HD goggles directly to your DJI Inspire, DJI Phantom 3 or DJI Lightbridge system. See in HD to make better aerial videos.
  • External AV input
    • Connect your 900MHz/1.3GHz/2.4GHz external FPV audio video receivers to the Headplay HD. Bring new life to your old FPV setup. Try it with the super crisp and bright Headplay HD.
  • Speaker
    • Turn up the loud speaker and let everyone around you know that you are flying. Hear the motor roar and the wind howl as you fly FPV. The true meaning of a immersive experience!
    • Picture
      • Screen resolution: 1280x800
      • Field of View: 72 degrees
      • Fully adjustable picture via intuitive menu system
      • 7inch HD LCD Screen
    • General
      • Control via side button panel (distinct button design for ""blind"" operation)
      • Rugged design with extremely durable EPO and Plastic materials
      • Very high comfort design
      • Adjustable, Heavy-duty elastic straps
      • Different density foam pads allow you to adapt the goggles to your needs.
      • Light-Weight Design: 400g (excluding battery)
      • Easy to clean optics
    • Electrical Properties
      • Current consumption 340mA@12V
      • Supply voltage: 6-15V Recommended 2S LiPo
      • Reverse voltage protection
    • Connectors
      • HDMI type C (HDMI-in)
      • XS9JK (latched high end connector): Power Supply, Video-in, Audio-in, Ground, 5V out
      • SMA antenna connector
    • Integrated Features
      • 32 channel 5.8GHz A/V receiver
      • 8 segment display
      • Sensitivity: -90dBm
      • Frequencies (MHz):
        Band 1: 5725, 5745, 5765, 5785, 5805, 5825, 5845, 5865
        Band 2: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
        Band 3: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
        Band 4: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
        (Compatible with most popular brands)
      • Built-in speaker with volume control on and up-down buttons
    • Included in the package
      • HeadPlay HD FPV Goggle Headset w/ 32ch 5.8Ghz Receiver (Black)
      • 2 Different lenses (to adapt to personal immersion wishes)
      • Hyperion G6 1300mAh 2S Hi-Voltage series hard case battery (10% more capacity), with charge adapter wires.
      • 30cm Cable (1 foot) with barrel type battery connector
      • 250cm Cable (8 feet) with AV-in, Audio in and barrel connector
      • 2 Face foam packs (different densities to allow comfort adjustment)
      • High-sensitivity Di-pole Receiver Antenna
    • Care Instructions
      • Keep your Headplay HDs free from dust. Try to avoid touching the optics. Clean the Headplay HDs with compressed air only. Avoid using cleaning cloth. Do not use any chemicals to clean your set and/or optics.
    • Questions & Answers
      • Q: Is the Headplay HD compatible with DJI Inspire1 and Lightbridge?
        A: Absolutely, the goggles are designed with these 2 products in mind! They can be directly connected via a HDMI cable. The picture quality is simply amazing! 
      • Q: What material is used for the Headplay HD housing?
        A: The goggles are made out automotive grade EPP which has been chosen for its superior strength (widely used in car bumpers) and for its low weight
      • Q: Can I wear glasses?
        A: Yes, but it depends on the width of your glasses. But the goggles can be modified with a sharp knife to adapt the width to your particular needs.
      • Q: Will there be spare housings available so that I can make adjustments to fit my huge glasses?
        A: Yes, we will probably be offering the housings available at an attractive price later on.
      • Q: Is the Headplay HD 3D enabled?
        A: No, the goggle uses a single high resolution screen. But due to the unprecedented viewing angle, the immersive feeling is almost like 3D.

Our shipping is painless and simple.  If you place your order before 2PM MST your product will be shipped that same day at no cost to you (*FREE Shipping applies to select products only and is only valid within the contiguous 48 United States).  Orders that ship to an address other than your billing address will be subject to further verification and may not ship same day. We are the premier online DJI dealer that provides official DJI products via free shipping on the same day as your purchase!  

Once you make your order you can track the progress of your package using the tracking number that we will provide upon shipping your order.  

On weekend purchases we will ship the following Monday. Orders are NOT shipped or delivered on Saturday or Sunday. If you purchase something after 2PM MST on Friday the order will be shipped first thing on Monday.  Free Shipping! It doesn't get any better.  Nobody works as hard as we do to please our customers! 

International Shipping Policy - We ship worldwide! We work with various companies to ensure that you get the best rate possible for your international shipping needs. All duties and taxes are the responsibility of the customer. Email us to get specific rate quotes.

Return Policy

Once a product is opened, all sales are final.  For any unopened products, you will have 14 days to return the product with a 10% restocking fee.

ALL RETURNS REQUIRE A RMA AUTHORIZATION NUMBER - CONTACT US BEFORE SHIPPING ANY PRODUCT BACK.

Warranty

The majority of our products (including DJI products) are covered under manufacturer's warranty. Drones Etc. does not provide any warranties whatsoever and defers to the manufacturer for any complaints/warranties/guarantees as Drones Etc. does not make, manufacture, or fabricate any of the products found herein.

And remember: These parts can be complex systems, failure of one component can result in a crash or damage. The warranty does not cover, and Drones Etc., LLC. is not responsible in any way, for damage to other equipment due to a failure of a component. Drones Etc. is not responsible in any way for the use, misuse, or any injury or damage to personal property from use of any equipment purchased at dronesetc.com.

Contact Us
support@dronesetc.com
800-398-2729
3060 W California Ave
Suite E
Salt Lake City, UT 84104
.
If a Warranty issue does arise and the item must be returned to the manufacturer for repair or replacement the customer has 2 options:
.
Option #1:  Contact DJI and obtain an RMA number.  The customer must then ship their purchase to DJI.  DJI will then inspect and then replace the purchase at their discretion.
Please contact them at us.support@dji.com and they will ensure you are taken care of.

If you contact DJI for support, please have available the following information:

  • Product name / number
  • Serial number
  • Date of purchase
  • Dealer name
  • Description of fault
  • Photo or Video of fault, if applicable
.
Option #2: Drones Etc. will manage the manufacture warranty process.  If it's a drone we will charge the customer $150 to manage this process.  If it's an accessory or part we will charge the customer $60.  This charge will cover the cost for Drones Etc. to receive the item, test the item, document the item, ship the item to DJI, follow up with DJI, ship the item back from DJI, test the item for replacement accuracy and then ship the item back to the customer.

We're here to help! If you have any questions regarding our products, an order you placed, or anything else drone related please send us an email via the contact form on the right of this page. 

You can also reach us by phone at 800-398-2729 Mon-Fri from 9AM-5PM MST.

Drones Etc.

3060 W. California Ave

Suite E

Salt Lake City, UT 84104

We're here to help! If you have any questions regarding our products, an order you placed, or anything else drone related please send us an email via the contact form on the right of this page. 

You can also reach us by phone at 800-398-2729 Mon-Fri from 9AM-5PM MST.

Drones Etc.

3060 W. California Ave

Suite E

Salt Lake City, UT 84104

Liquid error: Could not find asset snippets/modify_lightbox_snippet.liquid